Remote-technologies RPC-320 Manual de usuario descargar pdf (Pagina 29)

DIGITAL AND OPTO PORTS SECTION 6

Page 6-7 RPC-320

COMMANDS

The following tables shows the RPBASIC-52 commands

used for digital I/O.

Command Function

CONFIG LINE Configures I/ O ports

COUNT Returns number of pulses at a line.

LINE Function retur ns status of an opto

module as a 0 or 1.

LINE Statement turns on or off an opto

module.

LINE B Function returns 8 data bits from any

I/O type device.

LINE B Statement writes 8 data bits to any I/O

type device.

LINE # Function returns status of line at J3

connector as a 0 or 1.

LINE # Statement wr ites data to a line at J3

connector as a 0 or 1.

ON COUNT Counts pulses and optional generates an

interrupt.

ON LINE Generates an interrupt when a line

changes.

PWM Sets PWM parameters for any line.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 50 51

Sin comentarios

Remote-technologies RPC-320 Manual de usuario Pagina 29